Oxford Titan 10mm Disc Lock with carry pouch
Tough and reliable 10mm disc lock with strong Zamak construction, steel locking pin and carry pouch
View full detailsVerified Customer Reviews for Oxford Titan 10mm Disc Lock with carry pouch
It's a disc lock, that's about it. I can see a lot of 5 star ratings, but I'm going to be honest here.
You can break this lock within 20 seconds, without making any noise simply by using a bolt extractor and some force. It requires no skill whatsoever.
If the disk lock was more tight so there was no space for moving around on the disk or inserting bolts/screws, I'd rate this 4 or 5 as you can't beat the value.
But 20 seconds against a tool you can have in your back pocket? Come on Oxford, you can do better than this.
Can't fault these disc locks, decent quality, easy to use and great value
Works really well. Got one for each of my bikes. Make sure you get the bright yellow safety wire to hook around your brake lever as well.
Does what it says pretty much,
though it does flop quite a bit which does make it a bit of a pain when trying to get it off with thick gloves or when it rains, and the keys are quite small so they don't get in the way.
Oxford go from strength to strength. This is yet another high quality low cost product. I bought this to replace a Mammoth disk lock that failed on second usage; it locked in my pocket and refused to unlock. Thank heavens it didn't happen on the disk! The Oxford was only another couple of quid but worth it for the peace of mind.
Cheap but efficient disk lock serves as a visible deterrent
Bought as thief deterrents, wouldn't actually trust them to last being attacked with a hammer and some force.
Small and not cumbersome, can fit one in my pocket so easy enough to bring with me wherever I go. They come with 2 sets of keys and a handy webbing pouch.
Excellent, compact and good value
Nice size, solid, value for money. Easy to stow when travelling. At the end of the day it's a deterrent, but one that is easy to see in bright yellow.
I brought two of these, great purchase easy to use and compact so can take them with you when out riding
Fits Ok and easy to use. I choose a yellow one for the visual reminder that its fitted!
A good lock but the second time I used it I got in a right state. When unlocking it you must return the key to the straight down the lock position if you do that its fine, you can put the key in when it is not correctly aligned, I spent a good ten minutes trying to open mine using two of the keys and it will not open I was desperate to get me and the bike home!
Great stuff
Most if not all of these types of product are nothing more than a deterrent. Hopefully this one is seen by would be crims, and they move on. It's bright yellow, and feels well made, let's just hope it's never put to the test!
This lock is well made, strong and bright enough to be easily seen and work as a deterrence.
The lock is a little bit finicky and takes a couple of goes to get the hang of it but you'll work it out and it's a disk lock meaning that it's hard to pick without specific disk lock tools.
It makes a good secondary lock and an out and about lock, if you're leaving your bike for a long time I suggest this in addition to something bigger and stronger.
No complaints here, 3 keys and a carry case, all useful additions. Light enough and highly visible when fitted. Easy to lock and unlock too, recommended.
Had one of these for the past 8 years, great lock and never let me down so I bought another for my new bike.
The locks great and is an easy and light way to secure your bike when out and about. I wouldn't solely rely on it long term but is a good short term measure.
Oxford Titan 10mm Disc Lock with carry pouch
- Made from tough Zamak alloy
- 10mm steel locking pin
- High security Oxford locking mechanism
- One push-to-lock feature
- Convenient carry pouch included
About
Oxford
Oxford was established in 1973 and has grown into a leading global supplier of motorcycle products. Its vast range encompasses everything to improve life on two wheels: from clothing and helmets to accessories, hard parts, locks, luggage and much more. Products are designed in-house by a team of active enthusiasts and skilled technicians, based at the company's purpose-built headquarters in Oxfordshire. With the support of the latest CAD technology, a 3D printing suite and a fully equipped test laboratory, Oxford invents, develops and refines its products in pursuit of the best experience for two-wheel enthusiasts. Oxford employs over 150 staff and has ambitious plans for further growth in both the UK and globally.
You may also like...
Find it cheaper at any major motorcycle accessory retailer, online or in-store and we‘ll match it.
How to request a price match.