Oxford RB-Pi1 Back Protector Insert
CE level 1 flexible back protector insert designed for Oxford jackets
View full detailsVerified Customer Reviews for Oxford RB-Pi1 Back Protector Insert
Pliable, good fit for my Oxford Mondial Jacket. Adequate protection for me at the moment
Bought this for a Merlin jacket and it fits a treat.Soft and miable and hardens on impact this protector is great value for money.
Excellent price and quickly delivered as always by Sportsbikeshop..
I didn't realise when I purchased an Oxford textile jacket that a back protector was an extra, as the jacket represented such good value I should have done. However the Oxford protector supplied and delivered by Sportsbikeshop was reasonable priced and delivered with their customary efficiency.
Bought to fit in my Oxford riding shirt. Fits perfectly, comfortable and unobtrusive.
Feels a nice quality, slightly soft to the touch. Velcro strip is a nice touch to make sure it stays in place but isn't really needed in my use.
I have two of these, one in an Oxford jacket and the other in an RST and both fit readily into both despite different pocket sizing and attachment systems. I am glad to say I have not tested them and hope never to do so!
It's lost a star as the velcro srrip hadn't been put on straight so doesnt line up with velcro in jacket. Its a bit thinner and more comfortable than the level 2 protector which made the back of my Oxford Dakar stick out a bit too much, but I suppose thats what you get with a more substantial protector - it's a balance of comfort v safety. But overall good.
Great, well priced back protector that is light, comfortable and fits jacket perfectly.
Great service and quick delivery from SPORTBIKESHOP as usual :-))
Perfect fit in Oxford jacket.
Bought this to go in an Oxford jacket I purchased. There is the choice of 2. One is a level 1 the other a level 2. There is only a few quid between them so it's up to you which you have. The level 2 is only slightly thicker with a different pattern on it.
Fits neatly in my Oxford Mondial jacket, is not too bulky like the Level II protector I tried and gives unobtrusive reassurance.
Fits well and is very comfortable. Being level 1 protection it is obviously at the low end but as a back protector it will work fine and better than having nothing. I dont hope you need it but I'm sure if I do it will do a job for me. For the price, piece of mind, comfort and the level of protection it offers it is perfect. Well done Oxford.
Bought to fit in to a Oxford Mondial jacket which it does perfectly.
Not to thick and cumbersome and gives good coverage.
It's soft, doesn't restrict movement and you barely feel it's there, just how it should be. Haven't crash tested luckily, but hopefully it works.
Highly recommend, very comfortable and easy to fit excellent price very happy
I needed a back protector for my Oxford Mondial jacket. I tried the RB Pi2 but found it too bulky and uncomfortable. So swapped it for this RB Pi1. It's nice a d flexible once warm and a lot more comfortable. It fits the jacket well (I guess it should really!) and velcros in place.
Only gripes are that it is still not as unobtrusive as other jackets/protector combinations I have (e.g. Rukka, Daniese) and it's quite short so doesn't reach down to lower back.
Overall though I'm pleased with it, though haven't tested its protection in anger!
This fitted neatly into my triumph H2sport jacket. So light & flexible I don't notice it's there. Very happy
Does what it says on the tin, although it really should have come with jacket. At least it fitted no bother and is comfortable to wear . You can't however dispute the efficiency of Sportsbikeshop. Good job there isn't one in NE I'd be skint!
Fits in my jacket perfectly and with the use of the velcro provided stays in place very comfortable and moulds to your body.
Oxford RB-Pi1 Back Protector Insert
- Specifically designed for Oxford jackets
- Flexible design moulds to your back shape
- Provides CE certified level 1 protection
- Easy to install and non-intrusive
About
Oxford Clothing
Oxford was established in 1973 and has grown into a leading global supplier of motorcycle products. Its vast range encompasses everything to improve life on two wheels: from clothing and helmets to accessories, hard parts, locks, luggage and much more. Products are designed in-house by a team of active enthusiasts and skilled technicians, based at the company's purpose-built headquarters in Oxfordshire. With the support of the latest CAD technology, a 3D printing suite and a fully equipped test laboratory, Oxford invents, develops and refines its products in pursuit of the best experience for two-wheel enthusiasts. Oxford employs over 150 staff and has ambitious plans for further growth in both the UK and globally.
Questions and Answers
Will this fit the Oxford Walton. Leather jacket?
March 15, 2023This protector will fit inside your jacket with no issues.
Hi, does this item come with velcro on the back to attach to an Oxford Montreal jacket?
September 4, 2017The Oxford RB-Pi Back Protector Insert does have an attached velcro strip to aid fitment.
Hi Guys, Can anyone tell me the length & width of this back protector please. I need a replacement for my Wolf one piece and this looks the correct shape.
August 16, 2017This measures approximately 39cm by 30cm.
You may also like...
Find it cheaper at any major motorcycle accessory retailer, online or in-store and we‘ll match it.
How to request a price match.